RU
News from Anritsu(145)
News from Fluke(23)
News from Keithley(33)
News from Keysight Technologies(349)
News from Metrel(0)
News from National Instruments(145)
News from Pendulum(14)
News from Rigol(10)
News from Rohde & Schwarz(284)
News from Tektronix(157)
News from Texas Instruments(90)
News from Yokogawa(41)
Anritsu
Fluke
Keithley Instruments
Keysight Technologies
METREL
National Instruments
Pendulum Instruments
RIGOL Technologies
Rohde & Schwarz
Tektronix
Texas Instruments
Yokogawa
Login
Login:
Password:
Forgot your password?
Register
Information

KIPiS articles


Issue:  KIPiS 2008 #5
Given the variety and complexity of measurement and testing requirements found in most facilities today, a meter with a dual impedance input offers the troubleshooter or technician more flexibility to cover applications or measurement needs ranging from basic voltage testing to troubleshooting sensitive electronic circuits.

Issue:  KIPiS 2008 #5
On September 25, 2008, The Siberian Forum took place uniting over 100 companies from all over Russia, Kazakhstan and Belarus. The Forum included three large specialized exhibitions and also an exhibition of computer games and television-game devices. The manufacturers and suppliers of data communications equipment, communication systems, test and measuring equipment for communication systems etc. participated in this event which the following article is devoted to

Author(s):  Bryanskiy L.
Issue:  KIPiS 2008 #5

Bifurcation can be determined as a crucial moment in the history of society, science and technique in which or after which the further development can go in two or three ways and they all can be approximately equivalent. In this article the author tells about the connection between bifurcation and metrology by the example of SI and CGS system development of units proving that they can exist parallel

See the article here

Issue:  KIPiS 2008 #5

September 19, 2008 was the date of scientific and practical seminar “New in the Legislation on unity of measurements”, which took place in Federal State Institution “Rostest-Moscow”. The following article is devoted to the state regulation forms, the specifications of a new law, its contest and main conception. Also the accreditation and its principal have been determined for the field of maintenance of measurements unity within this new law

See the article here

Author(s):  Stearns, Phil
Issue:  KIPiS 2008 #5
When selecting an oscilloscope for a specific measurement, the first thing that most of us consider is the bandwidth required to accurately represent our signals. The oscilloscope's bandwidth tells us what spectral frequencies will be preserved and the maximum transition speeds that can be measured. In this article we briefly explore the relationship between bandwidth, sample rate and memory depth. As a result we will understand the tradeoffs involved and how we can mitigate them to make measurements with more confidence

Author(s):  Afonskiy, AlexanderDyakonov V.
Issue:  KIPiS 2008 #5
Instruments which successfully can be used in new fields of microelectronics and nanotechnology are considered in this article

Author(s):  Akihiko Oginuma
Issue:  KIPiS 2008 #4

Author(s):  Bryanskiy L.
Issue:  KIPiS 2008 #4

Even in ancient ages governments had some issues that could not be solved without the help of metrology. For safety valuable documents and linear measures standards were kept in churches. The author clearly showed the role of church in metrology within this article and even its influence nowadays

See the article here

Author(s):  Gnezdilov V.
Issue:  KIPiS 2008 #4
This article describes advantages of intelligent Lead Free soldering stations using high frequency heating in comparison with ordinary soldering stations

Author(s):  Akihiko Oginuma
Issue:  KIPiS 2008 #4
The author reviews the role of reference clock and the effects of clock jitter on data jitter, and discusses a new measurement technique equipped with the Agilent E5001A Precision Clock Jitter Analysis Application running on the E5052B Signal Source Analyzer (SSA) that delivers unprecedented capabilities, ultra-low random jitter (RJ) measurement and real-time jitter spectrum analysis on both RJ and periodic jitter (PJ) components, allowing you to improve your design quality

Author(s):  Afonskiy, Alexander
Issue:  KIPiS 2008 #4
In the article Aktakom DDS Signal Generators are considered. Their functional using possibilities, fundamental operating modes, performance attributes comparisons and advantages

Author(s):  Lawrence D. Maloney
Issue:  KIPiS 2008 #4

This article reviews that the mood of the test field's giant companies swung both ways in the turbulent year of 2007. And for the leading companies that provide the instruments for electronics test, the past year produced sharply contrasting results.

Author(s):  Karl-Heinz Weidner
Issue:  KIPiS 2008 #3

Author(s):  Levin S.
Issue:  KIPiS 2008 #3KIPiS 2008 #4
Record keeping of natural gas consumption, according to the measurements of the physical quantities which characterize the capacities of natural gas when moving in a pipeline, requires the solution of measurement tasks. Their mathematical support and software should be certified by means of experimental determination of inadequacy inaccuracy of the mathematical models used as well as the computing algorithms. These inaccuracies appear as a result of the analytic structure of mathematical models, the methods of their parameters evaluation, measuring inaccuracy and their transformation when calculating. The inaccuracies can be divided into structural, parametric and dimensional.
The following article shows the resolutions of measurement tasks of the determination of the natural gas volume flow basing on the approximation of the “accurate” model.

Author(s):  Afonskiy, AlexanderAfonskaya, Tatiana
Issue:  KIPiS 2008 #3

Recently there has been a College devoted to the standards of Russian Federation. Here is the interview with V. Lahov, the Head of Federal agency for technical regulation and metrology Rostehregulirovanie, who provided the information concerning four new standards, their parameters and also he shared his opinion about the prospects he sees in the future, the way of their development and also about other standards that can be introduced this year

See the interview here

Author(s):  Karl-Heinz Weidner
Issue:  KIPiS 2008 #3
The new R&S® ES-SCAN precompliance software is a user-friendly and cost-efficient tool for computer-controlled EMI measurements with the R&S® ESPI3 and R&S® ESPI7 test receivers. It simplifies and speeds up both lab-based precompliance measurements and the preparation for the final certification measurement.
The computer-controlled measurement sequence ensures the reproducibility of results. The graphical user interface is simple and logical in structure and allows immediate access to the program functions. Even first-time or occasional users can easily and confidently operate the precompliance software and fully concentrate on their measurement task

Author(s):  Roger Schmidt
Issue:  KIPiS 2008 #3
This article describes easy approach of determination and analysis of failed equipment when using IR-Fusion technology. Identifying location of a problem in a featureless or confusing visible image and how IR-Fusion technology shows and infrared problem area in a visible picture.
Thermographers have always wanted an infrared camera that produces images with both a wide field of view (FOV) and detailed spatial resolution. An infrared-only camera with this combination is prohibitively expensive for most applications. A less expensive way of providing both features in a single camera is to blend a wide FOV visible image with a smaller FOV infrared image. The major benefit of this combination is that thermographers can pinpoint and identify infrared problemareas ina clear visible picture. Maintenance technicians now have a direct correlation between a visible picture and an infrared identified problem area. A commercial camera with IR-Fusion technology has been available since May, 2006. This paper describes thermography examples that benefit from this combination

Author(s):  Afonskiy, Alexander
Issue:  KIPiS 2008 #3
Tektronix, Inc. announced the availability of the DPO3000 Digital Phosphor Oscilloscopes (DPOs). The new DPO3000provides triggering and decode support for the most popular serial buses used in embedded design applications such as I2C, SPI, RS-232/422/485/UART, CAN and LIN. Additionally, the new oscilloscopes offer 5M standard record length and utilize the popular Wave Inspector™ navigation and search controls to simplify finding events of interest. The new models also offer a USB host (thumb drive) on the front panel enabling easy transfer of screenshots, setups and waveform data to a PC. All models include Ethernet and a USB device (TMC) port on the rear of the instrument that enables plug-and-play PC connectivity. Additionally, all models provide the TekVPI™ probe interface that fosters communication between the DPO3000 and TekVPI probes

Author(s):  Afonskaya, Tatiana Afonskiy, Alexander
Issue:  KIPiS 2008 #3

Interview with Mr. Martyn Etherington, Vice President, Marketing, Tektronix, Inc. He tells about Tektronix’s position in the world market and marketing strategies in Russia. Also he informs about the production which is going to be introduced in the nearest future and speaks about the crucial factors of the company success

See the interview here

Author(s):  Malyshev Y.
Issue:  KIPiS 2008 #3

In the article calibrators KC series in accordance with the standard “ÃÎÑÒ Ð 8.624-2006” are considered and from the point of view of practical using them for decision basic and secondary tasks in calibration laboratory and beyond it.


Current issue
#4 December 2021
KIPiS 2021 #4
Topic of the issue:
Modern instrumentation
Search