RU
News from Anritsu(145)
News from Fluke(23)
News from Keithley(33)
News from Keysight Technologies(349)
News from Metrel(0)
News from National Instruments(145)
News from Pendulum(14)
News from Rigol(10)
News from Rohde & Schwarz(284)
News from Tektronix(157)
News from Texas Instruments(90)
News from Yokogawa(41)
Anritsu
Fluke
Keithley Instruments
Keysight Technologies
METREL
National Instruments
Pendulum Instruments
RIGOL Technologies
Rohde & Schwarz
Tektronix
Texas Instruments
Yokogawa
Login
Login:
Password:
Forgot your password?
Register
Information

Rohde & Schwarz presents VNAs with multiport architecture for measurements from 100 kHz to 40 GHz

Rohde & Schwarz presents VNAs with multiport architecture for measurements from 100 kHz to 40 GHz

02/15/2019

Thanks to its frequency range up to 40 GHz, manufacturers of active and passive components can use the new R&S ZNBT40 vector network analyzer for a wide variety of multi-antenna communications systems (MIMO, SISO, MISO), including radar systems for the A&D sector. It is perfect for measurements on frontend modules, antenna arrays and beamformer chips for 5G NR. It measures up to 24 test ports at the same time, enabling measurements on multiport components as well as simultaneous parallel measurements on multiple DUTs.

The R&S ZNBT is currently the only multiport vector network analyzer that can measure in the frequency spectrum below 300 kHz, making it ideal for specification tests in accordance with various standards such as USB-C.

The R&S ZNBT allows users to perform signal integrity tests in order to check crosstalk or length offset between lines or to detect faults in cables. Depending on the system to be measured, the R&S ZNBT40 is the right choice for measurements in development, service, and especially in production where substantial time and cost savings can be achieved by making up to 24 measurements in parallel.

Assured measurement characteristics on all test ports

In addition to measuring S-parameters on multiport devices, the R&S ZNBT VNAs can perform phase measurements on up to 24 signals. Rohde & Schwarz ensures specified performance on all R&S ZNBT test ports. Users can count on long-term measurement stability thanks to the instrument’s excellent raw RF data.

The new multiport vector network analyzers R&S ZNBT40 and R&S ZNBT26 are the latest members of the tried and tested R&S ZNBT family consisting of the R&S ZNBT8 (9 kHz to 8.5 GHz) and the R&S ZNBT20 (100 kHz to 20 GHz). These analyzers can also be equipped with up to 24 integrated test ports. The new 26.5 GHz R&S ZNBT26 and 40 GHz R&S ZNBT40 are available now from Rohde & Schwarz. For more information, visit www.rohde-schwarz.com/ad/press/znbt40

www.rohde-schwarz.com


Company profile:  Rohde & Schwarz

Back to the list


Related Information:

Current issue
#4 December 2021
KIPiS 2021 #4
Topic of the issue:
Modern instrumentation
Search