RU
News from Anritsu(145)
News from Fluke(23)
News from Keithley(33)
News from Keysight Technologies(349)
News from Metrel(0)
News from National Instruments(145)
News from Pendulum(14)
News from Rigol(10)
News from Rohde & Schwarz(284)
News from Tektronix(157)
News from Texas Instruments(90)
News from Yokogawa(41)
Anritsu
Fluke
Keithley Instruments
Keysight Technologies
METREL
National Instruments
Pendulum Instruments
RIGOL Technologies
Rohde & Schwarz
Tektronix
Texas Instruments
Yokogawa
Login
Login:
Password:
Forgot your password?
Register
Information

KIPiS articles


Issue:  KIPiS 2020 #3
The present article describes the capabilities of devices necessary for electrical laboratories for testing and measuring work. It should be considered that all types of work proceeded by electrical laboratories are «inthe- field» ones. That means the devices used should meet the following requirements: enhanced functionality, high measurement accuracy, reliability, impact resistance, and one of the most important requirement is the availability of Type Approval Certificate in Russian Federation which allows using such equipment in the field of metrological control and supervision. The current article will provide the examples of devices, convenient and multifunctional, that meet all of the requirements of electrical laboratories.

Issue:  KIPiS 2020 #3
The present article introduces new AKTAKOM APS-4215 and APS-4220 AC power supplies. Here you will find more details about the technical characteristics of these new devices as well as their functional capabilities which may significantly increase their popularity as multifunctional laboratory power supplies.

Issue:  KIPiS 2020 #3
2020 has caused many changes in all spheres of live. The majority of events and conferences earlier planned for this year have to be postponed for 2021. Nevertheless Rosstandart and other organizations decided to hold MetrolExpo conference but in absolutely new online format. This event got name Metrol- LIVE and was held on May 20 when the whole world was celebrating World Metrology day. Digitalization and its influence on the metrology, possible results and future prospects connected therewith became the main topics. Also it was followed by the skills contest for students where they could share their knowledge and master their skills in metrology industry.

Author(s):  Levin S.
Issue:  KIPiS 2020 #3
On September 1, 2019 ISO/IEC 17025–2019 came into force. This standard describes the general competence requirements for testing and calibration laboratories. In the present article professor S. Levin unites catastrophic historical facts, risk management analysis and this standard and considers whether this interconnection is actually possible and correct.

Author(s):  Levin S.
Issue:  KIPiS 2020 #2
Metrology is a fundamental science about the methods and means to reflect the physical objects nature with the help of mathematical models. And for metrology the problem of inadequacy has always been the central one. The present article by Professor S. Levin keeps very interesting centuries-old history facts that will help you to better understand this problem.

Issue:  KIPiS 2020 #2
The theme for World Metrology Day 2020 is Measurements for global trade. And this theme was chosen to create awareness of the important role measurement plays in facilitating fair global trade, ensuring products meet standards and regulations, and satisfying customer quality expectations. Indeed more widely metrology, the science of measurement, plays a central role in scientific discovery and innovation, industrial manufacturing and international trade, in improving the quality of life and in protecting the global environment. Read the following message from Martin Milton (Director of the BIPM) and Anthony Donnellan (Director of the BIML) to World Metrology Day 2020 and get to know their opinion about the important role of precise measurements and metrology for global trade affairs.

Author(s):  Maxwell, Matthew
Issue:  KIPiS 2020 #2
In the age of IoT, with ubiquitous wireless connectivity, meeting EMC requirements for any standard is becoming more difficult and time consuming. This article describes implementing a precompliance test with typical benchtop equipment, such as digital oscilloscopes.

Issue:  KIPiS 2020 #2
Our cars are becoming «connected» to information networks and increasingly dependent on wireless communication channels. And at the same time the number of on-board computing systems is rapidly growing. Like any high-speed and complex digital electronic system automotive electronics can be a source of electromagnetic interference and at the same time have great sensitivity to this interference. This article is dedicated to the discussion of electromagnetic interference (EMI) sources and the steps that engineers can take to identify, localize, and reduce their effects. The present article describes a device capable of measuring EMI characteristics with high accuracy — this is PXE EMI receiver by Keysight Technologies.

Issue:  KIPiS 2020 #2
AKTAKOM universal measuring devices are widely used in almost all kinds of spheres especially in service and repair due to their capability of combining multifunctionality, affordable price and high measurement accuracy. The present article describes the characteristics and functional capabilities of the most popular combined AKTAKOM models, provides the examples of their application for a wide range of measurement tasks.

Issue:  KIPiS 2020 #2
The current article describes the application of the multipoint measurement mode (automatic range or step sweeping) in AKTAKOM AMM-30x8 component analyzer series which expands the capabilities of the device, including semiconductor structures analysis, increases the results reliability and reduces the time it takes for measurements.

Author(s):  Afonskaya, Tatiana Afonskiy, AlexanderBorovskaya M.
Issue:  KIPiS 2020 #1
CES is the world’s gathering place for all those who thrive on the business of consumer technologies. It has served as the proving ground for innovators and breakthrough technologies for 50 years — the global stage where next-generation innovations are introduced to the marketplace. CES 2020 was held on January 7-10 with two additional special Media days organized on January 5 and 6 before the official show opening. From this very article you will get to know about the unique innovative devices you’ve never heard of before.

Issue:  KIPiS 2020 #1
This year AKTAKOM trade mark celebrates its 20th anniversary! The present article will tell you about the development and achievements of AKTAKOM, it will give you the answer to the main question — why AKTAKOM TM after so many years of existence truly stays the most popular and much-in-demand in Russia and CIS countries in the field of test and measuring equipment as well as industrial furniture.

Author(s):  Herdin, Marcus
Issue:  KIPiS 2020 #1
The R&S® Scope Rider combines the functionality and performance of a lab oscilloscope with the form factor and ruggedness of a battery-powered handheld device. An integrated logic analyzer and advanced measurement functions make it a universal tool for debugging embedded designs in the lab as well as for analyzing complex problems in the field.

Issue:  KIPiS 2020 #1
Combined devices are becoming more and more popular due to their multifunctionality. Handheld oscilloscopes are very convenient for in-the-field measurements. Nevertheless some types of measurements require several different measuring devices which can be hardly taken along with just a singly oscilloscope. RTH1000 series by Rohde & Schwarz can be considered a perfect solution therefore since it has compact dimensions as well as functional capabilities of laboratory oscilloscope. The following article will represent all of the advantages of this combined series.

Author(s):  Viktoriia Bykova
Issue:  KIPiS 2019 #6
If you visited two Moscow exhibitions ChipEXPO 2019 and Testing&Control 2019 held in October, then you know exactly, which companies develop, manufacture, support and are actively engaged in the import substitution of electronics in Russia. For those who haven’t found time for this, we offer a small overview of ChipEXPO 2019 and Testing&Control 2019 exhibitions.

Author(s):  Afonskaya, Tatiana Afonskiy, AlexanderBorovskaya M.
Issue:  KIPiS 2019 #6
As you know 2019 has brought very uneasy situation to Hong Kong. However this Autumn there were several exhibitions held in Hong Kong — Global Sourñe: Electronics in AsiaWorld-Expo and twin exhibitions Hong Kong Electronics Fair (Autumn edition) and electronicAsia that took place in Hong Kong Convention and Exhibition Center (HKCEC). Of course the number of people was a little bit less comparing to the previous year but to our impression these exhibitions surely stayed the same popular and interesting as always. In the present article you will find what innovative devices these events showed to their guests.

Author(s):  Afonskaya, Tatiana Afonskiy, AlexanderBorovskaya M.
Issue:  KIPiS 2019 #6
The future of electronics production is smart! productronica which took place at the Munich trade fair site from November 12 to 15, 2019 was proof of this. Over 1500 exhibitors from 44 countries presented innovations from the fields of electronics production and development. The trade fair covered trends such as the smart factory and smart maintenance and also looked at how to attract more young professionals and specialists. productronica once again made Munich the world’s most important meeting place for the electronics industry. Read the present review to see what’s new came on this huge exhibition space.

Issue:  KIPiS 2019 #6
The world is rapidly advancing into an era of new achievements and discoveries, technology development in all sectors. We keep up with the times, creating modern workplaces that offer a convenient arrangement of devices, tools and necessary equipment on the desktop, thereby increasing the level of labor efficiency and the quality of work performed. This review is dedicated to the most popular models of AKTAKOM industrial furniture, which is widely used in many scientific, production, service and metrological laboratories, in repair workshops and classrooms as well as at home.

Issue:  KIPiS 2019 #6
Not so long ago we published the detailed review on AKTAKOM handheld oscilloscopes in our magazine. These are high performance measuring devices that combine the functions of several devices in one compact housing. This time we’d like to introduce a review on an absolutely new model that can be considered a handheld device because it’s actually a tablet oscilloscope with large 8" display and also a benchtop device. New AKTAKOM ADS-41õõ oscilloscope can be taken to in-the-field work but at the same time you may use it in laboratory putting it on the table. The device will stand firmly and you may easily use its control panel with one hand. More details and technical specifications can be found in the present article.

Author(s):  Levin S.
Issue:  KIPiS 2019 #5
The latest issue of «Chief metrologist» magazine for 2018 contains rather interesting discussion concerning the use of «reliability» term in metrology. Although a wide range of regulatory documents keep this term can it be considered correct in its full meaning? Present article by professor Levin S. is dedicated to this matter and will inform you of more details upon this term use.


Current issue
#4 December 2021
KIPiS 2021 #4
Topic of the issue:
Modern instrumentation
Search