Anritsu Enhances Radio Communications Tester MT8821C to Support RF and PHY Layer Throughput Measurements for 6CA Terminals
24.11.2017 | 39Anritsu Company expands the measurement capability of its Radio Communications Analyzer MT8821C with the release of LTE-Advanced software solutions. When the new LTE-Advanced FDD DL CA 6CCs Measurement Software MX882112C-061 and LTE-Advanced TDD DL CA 6 CCs Measurement Software MX882113C-061 for LTE-Advanced/LTE Advanced Pro DL 6CA are installed, the MT8821C all-in-one solution supports RF and PHY layer measurements for 6 Carrier Aggregation (6CA) Single Input Single Output (SISO) and 6CA 2x2 Multiple Input Multiple Output (MIMO), as well as 6CA linked with Licensed Assisted Access (LAA).
Industry First Multi-Region V2X Message Analysis for Vehicle-to-Vehicle and Vehicle-to-Roadside Communications Standards Introduced by Anritsu
27.10.2017 | 52Anritsu Company introduces the V2X 802.11p Evaluation Software MX727000A, a first of its kind solution that supports V2X message analysis for U.S., Europe, and Japan vehicle-to-vehicle and vehicle-to-roadside (V2X) communications standards.
22.09.2017 | 74Samsung Electronics Co., Ltd, a global leader in advanced semiconductor technologies, has confirmed achieving DL 6CA (256QAM) max T-put (1.2Gbps) for its next-generation LTE modem successfully with Anritsu’s MT8821C Radio Communication Analyzer as the industry’s first test platform.
Anritsu Introduces Signal Analyzer/Spectrum Analyzer Options to Support External High-speed Data-transfer Interfaces Used in Emerging Designs
15.08.2017 | 100Anritsu Company introduces two new options for its Signal Analyzer/Spectrum Analyzer MS2850A to support high-speed transfer of captured waveform data to an external computer for post processing and analysis. Combined with the 1-GHz capture and analysis bandwidth, the options expand the capability of the MS2850A to address the needs of emerging wireless networks, including 5G, where experimental and prototype waveforms are being analyzed using simulation and analysis software.
Anritsu Company Introduces OBSAI RF Analysis Capability for Handheld Analyzers to Create Comprehensive Base Station Test Solution
04.07.2017 | 177Anritsu Company continues to address the emerging test requirements associated with 4G base stations with the introduction of OBSAI RF Analyzer software that expands the measurement capability of its industry-leading handheld analyzers.
Anritsu Company Introduces PIM Hunter™ Test Probe for More Efficient and Effective Location of External PIM Sources
23.12.2016 | 343Anritsu Company expands its field test portfolio with the introduction of PIM Hunter™, a passive intermodulation test probe that helps field technicians more quickly discover the precise location of external PIM sources at cell sites. Designed for use with Anritsu’s PIM Master™, Spectrum Master™ and BTS Master™ handheld analyzers, the PIM Hunter test probe enables field professionals to use traditional interference hunting techniques to accurately locate external PIM sources for optimum wireless network performance.
Anritsu Introduces CPRI RF Measurement Option That Dramatically Reduces Time and Cost Associated with Testing RRHs on 4G Networks
20.09.2016 | 443Anritsu Company introduces CPRI RF measurement capability in its market-leading E series of Site Master™, Spectrum Master™, and Cell Master™ handheld field analyzers that dramatically simplifies and lowers the cost of testing Remote Radio Heads (RRHs) installed atop 4G towers. Solidifying Anritsu’s position as the industry leader in field test solutions, the new option reduces network OpEx by allowing wireless carrier engineers, technicians and contractors responsible for wireless networks to identify interference sources on the radio uplink at ground level, reducing the use of unnecessary and costly tower climbing crews.
22.07.2016 | 478Anritsu Company introduces the Signaling Tester MD8475B, the world’s first all-in-one test solution supporting up to four component carrier aggregation (4CC CA) and 2x2 MIMO in a single test box. Integrated with the SmartStudio GUI, the MD8475B lowers cost-of-test and reduces space requirements compared to conventional solutions that require several test instruments, providing engineers with a highly efficient tool to conduct tests on chipsets, modules, and mobile platforms integrating the most recent LTE-Advanced specifications.
Anritsu Adds Tools to VNA Families that Improve Signal Integrity Testing Capability for Verification of High-speed Designs
28.06.2016 | 487Anritsu Company continues to address the test needs of signal integrity (SI) engineers with the introduction of options for its VectorStar® and ShockLine™ vector network analyzers (VNAs). The VectorStar Eye Diagram and ShockLine Advanced Time Domain (ATD) options are part of the expanding SI capabilities offered by Anritsu and provide SI engineers with improved tools to conduct channel diagnostics and model validation of high-speed digital circuit designs.
13.05.2016 | 522Anritsu Company and TRX Systems announce that they have entered into a partnership whereby Anritsu’s industry leading handheld analyzers are integrated with a 3D Indoor Location and Mapping solution from TRX Systems to create the industry’s first automatically geo-referenced RF signal mapping solutions. The MA8100A series TRX NEON® Signal Mapper simplifies and dramatically reduces the time required for indoor signal testing, making it an ideal solution for professionals who conduct in-building testing of public safety and commercial networks, including public safety organizations, network operators, and DAS installers.
|© "Test & Measuring Instruments and Systems" ("KIPiS"), 2000-2017|